The 12” Water to Air Coil Module is designed for use as a heating or cooling, fluid to air heat exchanger that can be placed before or after the RecoupAerator in the incoming fresh air stream. When installed before the RecoupAerator, the module acts as a pre heater or cooler, and dehumidifier before the air enters the RecoupAerator. When installed after the RecoupAerator, the module can be used to heat or cool the space.
Intended to be used with the UltimateAir Temperature Controller and Grundfos Alpha Water Pump, this water‐to‐air coil is designed to temper and condition the fresh air supply provided by the UltimateAir RecoupAerator®.
1. Pre‐heat defrost for the RecoupAerator when the incoming outside temperature air is below 10°F (hot water or geothermal ground loop)
2. Pre‐cooling/dehumidification to increase the cooling capacity of the RecoupAerator EconoCool feature (chilled water or geothermal ground loop)
3. Space heating using fresh air from the RecoupAerator
4. Space cooling/dehumidification using fresh air from the RecoupAerator